foamfiller

Profile Foam Fillers

Profile Foam Fillers

Profile foam fillers fill the gaps created by profiles of roof sheeting at the ridges and eaves. Our profiled foam fillers are designed to seal roofing and cladding profiles against dust, water and moisture ingress. If you don’t get this part of the job right, you can be chasing problems long after the project is ‘complete’.

The foam filler you need. When you need it.

We stock a wide range of filler pairs to suit the most popular profiles. And we can make any profile filler to order in 2 – 3 working days.

Know your foam fillers

Large flute – this is the filler that sits in the valley of the profile and is often used under the ridge flashing.

Small flute – this sits opposite the large flute and fits into the crown of the profile, and is normally used under the roof sheet at the eaves.

Pairs – when the roof is a simple pitch you can order matching pairs of large and small flute.

Symmetrical – if the crown and valley dimensions are the same you’ll use symmetrical profile fillers.

Ventilated Fillers – allows ventilation of the void and stops condensation from forming where it’s not welcome.

Bi-colour – white on one side, black on the other.

Timing – should be fitted while fixing sheets and flashings.

Angle Cut

Fillers which are to be fitted along hips or valleys must be cut to the specific angle formed by the flashing or valley and the short dimension of the profiled sheet. Known as the ‘true angle’, this is not the same as the angle on plan or the roof pitch, but rather is calculated from these two. The true angle can be calculated so long as both plan and pitch angles are supplied. 
In the case of particularly steep angles, fillers are supplied in either half, third or quarter cover-width lengths.

Our profile foam fillers offer:

  • Made to measure – can be supplied to suit any profile
  • Ventilated
  • Extended base
  • 
Self adhesive
  • 
Angle cut
  • 
In strip or single block form
  • Fire retardant
  • PE, EPDM or EPDM-faced
  • Black or white

Typical application

  • Sealing ridge & eaves
  • Sealing hips & valley
  • Sealing rooflights
Category: .

Reviews

There are no reviews yet.

Be the first to review “Profile Foam Fillers”